Install Shock Lockouts

What happens here

Before installing the loader arms, raise the front of the ATV to fully extend the shocks. Install the adjustable shock blocks (lockouts) around the front shocks. These blocks consist of two sections held together by a nut and bolt, allowing for adjustment. Slide the larger end of the block over the shock's coil from the bottom, adjust to the desired height (typically the highest point for the upper piece and lowest for the lower piece), and secure with the cotter pin and chain. Repeat on the other side. Lower the ATV to engage the shock blocks, making the front end stiff and preventing flex.

Goal: Stiffen the front suspension using shock blocks.