Additional Features and Safety Measures

on that hole where your post needs to be this is the prototype machine and so we're making some small design changes as we put this into more fence builders hands to give it a really good test and it's been in several several guys hands this machine's got about 100 hours on it but we put a small winch on it that's not really a wire stretching type of a winch that's maybe if we got stuck to help get the machine out they are really well balanced and usually if you've got a track spinning on one side you can move the weight around and so getting stuck is really not an issue but we thought it would be good to have just in case we could put a bigger winch on either side but it would probably be in place of the blade if you didn't need the blade standard is a tool box a lockable toolbox in this we keep some rock spike parts obviously you could put anything you needed in there eight gallons of fuel we've gone to uh multiple bulkhead fittings on this machine so it's it's uh it's really more refined than many of the machines in the past it's a way larger frame on what we call the tele arm so even though it's got a foot that you can put down this machine's stable enough and it doesn't it doesn't bounce at all with that big boxy uh tele arm assembly this is a three cylinder yanmar 24 horsepower diesel uh tier four compliant uh we're running uh poc pochlane hydraulic pumps and final drives it's a well-known reputable source the blade could be used to dig in say an underground lead out wire there's something in the line of your your fence row a piece of something that's too heavy to move you can use it but it's primarily there for stability so on a hill say it was wet and slick and the machine's running away from you that's a good way to stop things the rubber tracks you get on frozen ground especially things get slick on the front this is a tool carrier and it is a quick attach so we can build any attachment to go on this quick attach but this lifts up and down in here we've got some of our profile punches a post rotator it's a hydraulic post rotator the wood post cap some bigger augers we can run up to a 12 inch auger on this machine obviously the goal is to to drive all the post easy to service the the hood opens right up both sides so it's easy to get to the fluids uh check hydraulic oil change the oil service things what not key switch is here and then this is all the fusing and electronics are in this lock box we've got dual emergency kill switches here and then…