Skip to main content

First Startup and Engine Break-in

15:41
20:33
77.7K views

At 15:41 in

You're gonna love this!Testing THE BEAST! 572XP Pro Chainsaw!

What happens here

For the first startup, put on all required safety gear, including chaps, a helmet with ear protection and a face shield. Press the compression relief valve on the top of the chainsaw. Then, locate and press the fuel primer bulb until fuel is visible, followed by two additional presses. Next, pull the choke control lever out and up to engage full choke. Place the chainsaw on the ground or a stable surface, ensuring the chain brake is engaged. Brace the saw with your foot or knee and pull the starter cord firmly until the engine 'fires' (makes a brief sound). Immediately push the choke lever down (to half-choke or off position depending on the model) and pull the starter cord again to start the saw fully. Allow the new chainsaw to idle for approximately 5 minutes for a proper break-in before engaging in heavy cutting tasks. This initial idling helps the engine components settle.

Goal: Safely start the new chainsaw for the first time and allow its engine to break-in.

Tools and materials

  • Husqvarna 572 XP Chainsaw Husqvarna — The chainsaw being started
  • Safety Chaps Husqvarna — Leg protection from chain contact
  • Safety Helmet — Head, face, and hearing protection

What they say

Hide

we always wear a safety gear okay for our first fire up we've got a compression relief valve we press that down and we've got a pump a little fuel pump right here we're gonna pump that until we start seeing fuel and then we're to give it two pumps after one two okay now our choke this is a little different than a regular saw our choke and our stop are in the same place so choke is up pull out and go up i'll show you pull out like so go up that's full choke once it's running click it down to stop the saw press that and that kills the saw pretty cool let's go over here in the grass and fire it up for the first time we'll put our choke up we'll give her a tug fired take our choke down and pull one more time whoop there it is now this is a brand new sauce so we're going to let it sit there and idle for just a little bit and kind of break in that motor i'm going to let it run there for about five minutes i'll throw it in the back of the kubota and we're going to head over there and we're gonna cut some

Auto-generated from the video audio.