Assemble Bar, Chain, and Chain Catch

let's install our bar flip this guy over and gently disassemble now i have learned a lesson before you want to make sure if you're taking a saw apart i think it's make sure you're like it's unlocked i think it needs to be unlocked yeah make sure that you're unlocked or it's a huge huge hassle especially with this one i'm not sure with the pro saw so what grandpa used to always say is learn from others mistakes that's what a a fool learns from his own mistakes and a wise man learns from the mistakes of others okay so probably should read the instructions before i do this but i didn't there we go we've got a little rubber piece right there to hold things in place uh here's our bar and for this we'll put it put the bar on right side up okay here's our chain got to be careful when you're fooling with a chain chainsaw chain because these things are sharp especially with these xp saws man you're working with a dangerous piece of equipment we always use our safety gear here on the farm so you want your cutting edge going that way that's what we have so this pro saw you never can lose your nuts off of your cover with the consumer grade saw that's one of the most common parts to lose off your chainsaw is one of those uh nuts that holds the chain in place we need to back off on our set screw a little bit right here we've got a special surprise getting ready to come around the corner here guys we've been clearing land on the farm here for about two weeks i've been in an excavator for somewhere in the neighborhood of uh 96 hours in the last two weeks and coming around the corner is my loader operator frank he's been up there fixing up a new pond that we just built all kinds of fun stuff going on here on the farm here's our special treat this is our kubota rtv x love it but there's frank getting ready to cruise by last video we put a new set of tracks on that thing i'm gonna just snug these guys down and then i'm gonna lay it flat and i'll show you why here in just a second our chain isn't very tight and i already cut myself with it you don't want your chain to be too tight that's almost too tight right there but i've got a little bit of play in the chain and it's going to break in so i anticipate having to adjust it before i uh after i run it for just a few minutes anyway so we're gonna lift up on the bar and snug the bar down and guys notice the length of this chainsaw wrench uh if you already posted the answer down there you already know what it's called see why see…