Skip to main content
Stesso

Assess and Drain Old Compressor Oil

5:57
11:12
22.9K views

At 5:57 in

YOUR AIR COMPRESSOR MAY NEED AN OIL CHANGE...HERE'S HOW TO DO IT!!

Watch on YouTube

What happens here

Before draining, visually inspect the air compressor. Locate the oil fill/drain plug, typically a bolt or cap at the bottom of the pump assembly. Place a suitable container underneath the plug to catch the old oil. Use an adjustable wrench to carefully loosen and remove the plug. As the old oil drains, observe its color and consistency. Dark, milky, or metallic-flecked oil can indicate excessive wear or contamination, which might require further inspection or professional service. For this compressor, the oil appears dark but still serviceable, indicating that the new synthetic oil will help reduce friction and prolong its life.

Goal: Remove old, degraded oil from the air compressor and inspect its condition.

Tools and materials

  • Adjustable Wrench — Loosening and tightening the oil drain plug
  • Old Oil Collection Container — Collecting the drained used oil
  • Rag — Cleaning around the oil plug opening

What they say

Hide

easy so the first thing we're going to do guys we're gonna take this bolt out this plug out right here we're gonna see where the fluid level is in the compressor and then we're gonna drain out the fluid put this cap back in and refill the fluid just that simple just that easy just put a new oil in the compressor what we're gonna look for we're going to inspect also when we take it out we're gonna look for little metal shards or something like that anything that's out of the ordinary black really really black oil we're just inspecting it and we're thinking it through while we're doing it it's not as if we're gonna replace this piece on the compressor it would probably cost more than the compressor anyway also the tools that I use to change my oil I always wipe them down really really good funny how some people say oil and some people say all around here it's called ol don't change it all you know for the sake of this video we're gonna call it oil because it is oil not all let's take this thing off see what happens all right you got our engineer unscrew take our finger screw that off just give it a little glance look down in there it's crammed packed full of oil and it looks pretty good if you ask me then we're gonna take our plug out so we'll take a long funnel before we do this and we'll loosen her up take it out drain the oil out not a lot of oil in this machine I do see a little yucky right in there it's a little yucky I'm gonna give her a little bit of a tip we're gonna put our cap back on here's

Auto-generated from the video audio.