Preparing and Applying Stone Veneer
1:05
1:52
9.2K views
At 1:05 in
You can diy a $20k outdoor kitchen for $5k
What happens here
Prepare the mortar for applying the stone veneer. Mix a bag of mortar mix with water in a bucket using a mixing drill and paddle attachment until it reaches a consistent, workable paste-like consistency. Apply the mixed mortar to the back of each stone veneer piece using a trowel. Starting from the bottom, press each stone firmly onto the cement backer board, ensuring good adhesion. Use cardboard or shims to maintain even spacing between rows if desired. Continue this process, building up the stone veneer layer by layer, carefully cutting pieces to fit around corners and openings.
Goal: Apply the aesthetic stone finish to the exterior of the kitchen.
Tools and materials
- Angle Grinder — Cutting stone veneer pieces to fit
- Bucket — Mixing mortar
- Cardboard/Shims — Maintaining level lines and spacing between stone rows
- Mixing Drill Ryobi — Mixing mortar
- Mixing Paddle — Attaching to the drill to mix mortar
- Trowel — Applying mortar to stones
- Mortar Mix — Adhering stone veneer to the backer board
- Stone Veneer — The decorative exterior finish of the kitchen
- Water — Mixing with mortar