Surface Preparation: Sanding and Wire Brushing

so i'm just going along i'm going to be sanding first and then i'm going to be wired brushing so sanding and wire brushing trying to get off any excess and loose rush we're going to be wiping this thing down after that and then i'm going to be going around and using the primer i'm going to be rolling the primer on on troublesome areas and one of the great things about the rust-oleum it can go on bare model it can go right over rust also if you got excessive rust you definitely need to remove the excessive rust i'm using a primer right here this is a high performance rusty metal primer so it can go right over the top of rust but you really need to help get some of that rust off the loose stuff and then um and then you can pry from there i'm going to be rolling it on to help with bite adhesion and penetration so i'm going to be rolling it on just with a weeny roller uh we got to protect the ground so we've got to be putting cardboard shields and stuff underneath this fence because i don't want to get any overspray we're going to be spraying the um fence all the top coat with an hvlp sprayer so um just come right along and we're going to be working on this and you can see some tips and tricks and i'll show you what i'm doing as i go and talk about it as i go any of the tools that we're using or a lot of the tools we're using in our videos or down in the video description below if you want to get more information about those tools or products don't forget if you enjoy our videos hit the subscribe button hit the notification bell that way you get notified every time i come out with a new video it's free simple easy to do it doesn't cost you anything just click click if you hit the subscribe button and not the notification bell it's not going to do you or me any good let's get on with the fans right some of the tools and products i'm going to be using on this fence once again i'm using oil-based uh industrial rust-oleum i'm using a rusty primer for the priming i don't have to prime the entire fence but then i'm going to be top coating it with a gloss black i've got just a simple wire brush i've got a few really rusty spots i'm going to be wire brushing i'm using an ekasan 3x4 sander with foam sanding pad just the three by four sanding pads and these are a medium grit sanding pad right here so this makes the sanding process pretty fast and easy i'll be using um i'll be using just a little weenie roller just to do the priming right here and then i'll use another…