Remove Old Caster Wheel Bearings and Clean Housing
2:16
52:11
10.8K views
At 2:16 in
Wrong Cheap HARBOR FREIGHT China Tool.... So I BEAT it with HAMMER!
What happens here
Position a vice on a sturdy workbench. Secure the caster wheel assembly in the vice. Use a hammer to forcefully strike the worn bearings out of the caster wheel housing. Once the old bearings are removed, clean the inside of the housing. If the housing is marred or scarred, use a file or a Pittsburgh Engine Cylinder Hone to smooth out the imperfections, ensuring a clean and smooth surface for the new bearings. Then, use a lubricant like assembly lube on the housing and new bearings to facilitate installation.
Goal: Prepare the caster wheel housing for new bearings.
Tools and materials
- Caster Wheel Assembly — The part from which bearings are removed
- Clean Rags — Wiping away debris and lubricant
- File — Smoothing rough edges inside the bearing housing
- Hammer — Driving out the old bearings
- Safety Glasses — Protecting eyes from debris
- Safety Gloves — Protecting hands from grease and sharp edges
- Vice — Holding the caster wheel assembly steady
- Assembly Lube — Lubricating the bearing housing and new bearings