Skip to main content

Drain Water from Hose (Bonus Tip)

2:08
4:09
3.9K views

At 2:08 in

Winterizing a Pressure Washer FAST! Quick Tips in Under 5 Minutes.

What happens here

For proper hose storage, especially during winter to prevent freezing, stand on a raised surface (like a truck bed as shown) while holding one end of the hose. Allow the other end to hang freely to the ground. Systematically coil the hose from the highest point downwards, allowing gravity to force all the water out of the hose. This not only prevents freezing but also makes the hose lighter and easier to handle for storage in a trailer or other location.

Goal: A bonus tip shows how to drain water from the pressure washer hose by coiling it from a raised position, allowing gravity to remove all water for storage.

Tools and materials

  • Pressure Washer Hose

What they say

Hide

long time so here's a quick tip for you uh summer and winter time so my hoses it is winter time here i don't want my hose to freeze with water in it also in the summertime i don't want water coming out of my hose all over inside my trailer so i just get on top of my truck bed roll up my hose and you'll see my hose all the water empties out the opposite end because i'm higher than the other end of the hose so now my hose won't freeze nor will it spill water all over the place inside my trailer and the hose is also a lot lighter than if it was full of water simple little tip so there you have it simple

Auto-generated from the video audio.