Assemble and Connect Freestanding Faucet

it's faucet time so this is a faucet we ordered amazon i'll put a link down description so you guys check it out this is a standing one fun fact they're pricey like even the cheap ones on amazon's are really expensive so if you're gonna tackle this project know that this is a mounting bracket now this is going to go into the ground anchored in whether you have concrete floors or or osb and then this part screws into this and the water lines which are here these are half inch water lines they will run through here attaching to the pecs coming out of the ground so i'll connect my pecs screw these in attach these anchor this into the concrete and then we'll connect the rest of the faucet [Music] so there's a problem uh the way this faucet is set up that when you connect your water lines you have to be able to push the water lines into the ground so you could sit flush right here this is a concrete slab and i can't have a hole with the anchors there while having a hole in the bottom because i can't get my my pex clamp in there it's so frustrating so my thought process here is i created elbows and having at the corner so what i'm going to have is these connections tied around each other that'll give me space and then this flange will cover it and secure it again not perfect but definitely workable