Skip to main content
Stesso

Correct Installation of Hurricane Ties and Alternatives

1:30
1:50
695.8K views

At 1:30 in

Why your house doesn’t blow away 👍 #carpentry #framing #learn #build

Watch on YouTube

What happens here

The presenter demonstrates the correct installation of a hurricane tie, pointing out the 'plate line' marking on the tie that should align with the top of the double top plate for proper function. An incorrectly installed tie (either too high or too low) would not provide the intended uplift resistance. As an alternative to hurricane ties, the presenter shows how a screw installed at an angle into the rafter can also help resist uplift forces.

Goal: Illustrate proper hurricane tie installation and an alternative connection method.

Tools and materials

  • Hurricane Tie Sample — Demonstrating correct and incorrect installation
  • Pointer Stick — Highlighting specific features and connections
  • Screw — Showing an alternative connection method for rafters

What they say

Hide

stud and your bottom plate, and your anchor bolt is what holds from uplift. In some cases, strapping is required as either on the interior side or the exterior. It's common that these get installed wrong, either too high or too low. It says plate line right here, and this sits at the top of the double top plate. This screw gets installed into your rafter at an angle and does the same thing. Thanks for watching.

Auto-generated from the video audio.