Skip to main content
Stesso

Prepare for Future Connections and Re-Cap

0:39
0:47
7.5K views

At 0:39 in

Who Else Love Sharkbites For This? #diy #plumbing #plumber

Watch on YouTube

What happens here

After successfully removing the push-fit cap, the copper pipe is now exposed and ready for the next phase of plumbing work. This typically involves soldering on an adapter if you plan to transition to a different type of piping, such as PEX. Once the new connections are made, or if the pipe needs to be temporarily sealed again, the push-fit cap can be re-installed by simply pushing it back onto the pipe until it is fully seated. With the pipe capped off, the water supply can be safely turned back on for other parts of the system.

Goal: Ready the pipe for permanent connections or temporary re-sealing.

Tools and materials

  • Copper Pipe — The pipe to be worked on
  • PEX piping — New plumbing connection (mentioned as an example of next step)
  • Push-Fit Plumbing Cap SharkBite — Re-sealing the copper pipe end
  • Soldering Adapter — Connecting PEX or other pipe types (mentioned as an example of next step)

What they say

Hide

adjustable jaw, you can use a bunch of different things. You just hook this up. And then just pry up. Now when we come back over, we're just able to pop this off. We'll solder on an adapter and we'll run PEX. Now this is capped off, we're ready to turn the water back on.

Auto-generated from the video audio.