Fabricate Fire Pit Pan
At 0:24 in
Which sound in this clip is the most annoying? I need everyone to weigh in. This is research 🧐🤣
What happens here
Lay a large, flat metal sheet onto a stable work surface, such as a wooden pallet. Position the brass gas burner assembly on the metal sheet as a template and mark the cutting lines accurately using a marker. Ensure all dimensions are correct for the intended opening. Using a circular saw equipped with a suitable metal-cutting blade, carefully cut along the marked lines. Perform multiple passes if necessary, and ensure clean, straight cuts to create the custom-sized fire pit pan. This pan will serve as the base for the burner assembly and will fit into the previously prepared concrete structure.
Goal: Create a custom-sized metal pan for the fire pit burner
Tools and materials
- Circular Saw DeWalt — To precisely cut the metal sheet according to the marked lines
- Hearing Protection — To protect ears from the loud noise produced by the circular saw cutting metal
- Marker — To clearly mark the cutting lines on the metal sheet
- Measuring Tape — To measure and verify dimensions on the metal sheet for accurate cutting
- Metal Cutting Blade — The specific blade designed for cutting metal when attached to a circular saw
- Safety Glasses — To protect eyes from sparks, metal fragments, and debris generated during cutting
- Wooden Pallet — To serve as a stable and disposable work surface for cutting the metal sheet
- Work Gloves — To protect hands from sharp edges of the metal sheet and from sparks
- Brass Gas Burner Assembly — Used as a template to ensure the fire pit pan is cut to the correct dimensions for the burner
- Metal Sheet — The primary material from which the fire pit pan is custom-fabricated