Connect and Program the Mighty Mule Opener
At 5:05 in
WHAT THE HECK CRUSHED OUR FARM GATE?? CHUPACABRA!!!!
What happens here
With the gate leveled, now attach the Mighty Mule 360 opener to the post-mounted bracket and the gate-mounted bracket. Ensure the opener is fully retracted before marking and drilling the gate for the gate-mounted bracket (unlike the video creator's initial mistake). Once the brackets are in place, connect all necessary wiring: the solar panel to the solar input, and the battery to the power terminals. The unit typically comes with a small remote for initial testing. After connecting power, run the gate through its full open and close cycles. In the closed position, locate and press the 'Limit Set' button on the circuit board to set the closed limit. Then, open the gate fully and let it close on its own to allow the opener to learn its open limit.
Goal: Integrate the automatic opener with the gate and calibrate its open/close limits.
Tools and materials
- 12V Marine Battery — Powering the gate opener (preferred over standard car battery for deep cycling)
- Bolts — Securing brackets and the opener to the gate and post
- Drill Bit — Creating pilot holes and through-holes for bolts
- Drill DeWalt — Drilling holes into the gate for the mounting bracket
- Hammer — Punching marks for drilling
- Mighty Mule 360 Gate Opener Mighty Mule — The main automatic gate opener unit
- Nylon Bushings — Reducing friction and wear between moving parts of the gate opener and pin
- Punch — Creating divots for precise drilling starts
- Retaining Pin — Securing the opener to the gate-mounted bracket
- Screwdriver — Connecting wires to the circuit board terminals