Install Extended Downspouts
At 19:39 in
What happened to the Unicorn Toyota Pickup?? Oil is everywhere!
What happens here
The final DIY task involves installing extended downspouts on the 'Mega Shop' building. The existing downspouts are too high due to a newly poured concrete pad, leading to improper drainage. The creator uses a Milwaukee M18 oscillating multi-tool to precisely cut the downspout extensions to the required length. To ensure a snug fit, he then uses a crimping tool to create a dimpled edge on the top end of each extension, allowing it to slide into the existing downspout. For protection, he places a piece of scrap sheet metal behind the downspout while cutting to prevent damage to the building's siding. Finally, he uses a Milwaukee drill to secure the extensions in place with screws. This process is repeated for all four downspouts on the building.
Goal: Extend downspouts on the workshop for proper drainage.
Tools and materials
- Crimping Tool — Creating dimples or crimps on downspout ends for a secure fit
- Drill Milwaukee — Drilling pilot holes and driving screws to secure downspouts
- Milwaukee M12 Cut-off Tool Milwaukee — Slicing through sheet metal for downspout modifications
- Milwaukee Oscillating Multi-Tool — Precisely cutting the downspout extensions to length
- Safety Glasses — Protecting eyes from metal shards and debris
- Scrap Sheet Metal — Protecting the building's siding from damage during cutting
- Work Gloves — Protecting hands from sharp edges of sheet metal
- Downspout Extensions — Extending existing downspouts for proper water diversion
- Screws — Securing downspout extensions to the building and to each other