Install Bedding Sand and Lay Pavers
0:14
0:41
2.9K views
At 0:14 in
Well, charcoal, but same thing. #hardscapebrotherhood #landscaper #landscaping #Unilock
What happens here
After the edge restraints are installed, spread a 1-inch layer of bedding sand (concrete sand) over the compacted gravel base. Use screed rails and a straight edge to achieve a perfectly smooth and level surface, ensuring the required slope for drainage is maintained. Carefully lay the Unilock Holland pavers in the desired pattern (e.g., herringbone, as seen in the video), working from one end and ensuring tight joints between pavers. After all pavers are laid, make any necessary cuts using a wet saw to fit around curves or existing structures.
Goal: Lay the main walkway pavers on a level and stable bedding layer.
Tools and materials
- Hearing Protection Howard Leight — Protecting ears from loud saw noise
- Rubber Mallet Estwing — Gently tapping pavers into place
- Safety Glasses 3M — Protecting eyes during cutting
- Screed Rails — Creating a consistent height for the bedding sand
- Straight Edge Johnson Level — Leveling the bedding sand
- Unilock Holland Pavers — The main surface of the walkway
- Wet Saw Husqvarna — Cutting pavers to fit specific shapes or edges
- Bedding Sand — Creating a level bed for the pavers