Skip to main content
Stesso

Secure Cartridge with Gasket and Flange Nut

0:34
1:15
1.2K views

At 0:34 in

Urinal Cartridge replacement!

Watch on YouTube

What happens here

Once the main cartridge body is in place, install the rubber gasket onto the threaded portion of the cartridge from underneath the urinal or by reaching through the front opening. This gasket provides a watertight seal. Following the gasket, thread on the plastic flange nut and tighten it securely. The video indicates using a tool to ensure it's 'nice and tight' but doesn't explicitly show the tool being used at this point, but it could be the same needle-nose pliers used earlier or channel locks/a wrench.

Goal: Create a watertight seal for the new cartridge.

Tools and materials

  • New Waterless Urinal Cartridge Assembly — Components for securing the cartridge (rubber gasket, flange nut)
  • Pliers — Tightening the flange nut

What they say

Hide

everything. Your old one, here is your new one. Bottom part unscrews, that's what goes into your wall. We're going to go ahead and we're going to drop this through the top. Seal on the bottom going this way along with your plastic and your nut. Ring right here. We got this ring nice and tight. All right, we got our big flange nut on there and we got that little piece connected to the wall. Gallon of water, we're going to test for leaks.

Auto-generated from the video audio.