Skip to main content
Stesso

Bleed and Test the Hydraulic System

13:20
20:49
40.4K views

At 13:20 in

Unveiling a Brand New Plow! 4K

Watch on YouTube

What happens here

Once all hydraulic lines are reconnected, it's essential to bleed the hydraulic system. Run all plow operations (up, down, left, right) back and forth multiple times to circulate the hydraulic fluid and expel any trapped air. Continuously check and refill the hydraulic fluid reservoir as needed until the system is full and operates smoothly without air pockets. The plow is shipped dry, so it needs to be filled and bled.

Goal: Ensure proper hydraulic function and remove air from the system.

Tools and materials

  • Hydraulic Fluid — Filling and topping off the hydraulic system

What they say

Hide

business so basically to make a long story short all they did was take these hoses off here remove this center pin put that center pin back in Hook the four hoses up now you got to bleed the system though to get any air out yeah you have to run the system all the operations back and forth and then make sure you keep filling it as you fill up the cylinders okay cuz it's shipped dry okay all right well it's time to load this up and take these to their new home

Auto-generated from the video audio.