Adjust the Rake for Crowning the Driveway

1:39

13:13

59.3K views

At 1:39 in

Ultimate Driveway Restoration!

Watch on YouTube

What happens here

To crown the driveway, the rake needs to be adjusted so that one side is lower than the other, creating an angle. This is achieved by adjusting the wheels on either side of the rake. The presenter demonstrates pulling a pin from the wheel assembly and moving it to a different hole to raise or lower that side of the rake. For crowning, one wheel is set to the furthest front (lower) position, and the other to the furthest rear (higher) position. This angling ensures that when the rake is pulled, it creates a subtle peak in the center of the driveway, directing water off to the sides.

Goal: The presenter demonstrates how to adjust the TR3 rake to achieve a crowned effect on the driveway, which allows for proper water drainage.

Tools and materials

ABI Attachments TR3 Rake

What they say

(981 characters)

Hide

[Music] all right folks welcome to the farm channel if this is your first time to the stoney ridge please jump in pound that like button consider subscribing to the channel this is rural content at its best here on the farm so what we have going on is gunfire behind us that's country content right there what we have going on is the tymt 1104 today this is 110 horsepower tym tractor it's the big boy it's the biggest one they make that's why i call it big t so it's a cab tractor it's very very comfortable again about 110 horsepower four-wheel drive machine but it's on a small platform in other words it's not a huge tractor like these 140 150 horsepower gigantic tractors it's small enough that i can utilize this tractor around the house for chores such as working up the driveway and we're gonna mate it up to the tr3 rake back here it's about a seven foot wide tractor rake three in one so let's go back there and we'll take a look at the tr3 rake and show you how it works

Auto-generated from the video audio.