Level and Adjust the Brush Hog Deck
At 12:28 in
Tractor University: Proper Mower Deck Setup for Brush Hogging
What happens here
Once the brush hog is attached, drive the tractor to a flat surface (like a paved area or a level gravel road) to adjust the implement. The primary goal is to ensure the brush hog's deck is perfectly level from front to back and side to side for optimal cutting. Adjust the height of the back wheel (also known as a gauge wheel) on the brush hog first, by pulling a pin and selecting the desired height hole. Then, adjust the top link to achieve front-to-back levelness. The host notes that the back wheel should always be pointing backward, and it's designed to swivel 360 degrees. The top link can also be adjusted further to allow for 'flex' when traversing uneven terrain, preventing the brush hog from digging into the ground or lifting too high.
Goal: Achieve a perfectly level brush hog deck for optimal mowing.
Tools and materials
- John Deere 5065 Tractor John Deere — Used to raise/lower the 3-point hitch for adjustments
- Pins — Securing the gauge wheel height
- Top Link — Adjusting the front-to-back angle of the brush hog