Reassemble Faucet Trim

dripping wind the valves off this is great we'll pop this bad boy right here you've got to have a couple of these other pieces from this bag to make this work this o-ring and this other little squeezy MC squeezer tin here goes in that pop that down in there the O-ring will just go right over the Bonnet nut and it just kind of sits back there and it's going to allow this whole thing to travel back to where it needs to right so check that out now that sets that ain't going to go nowhere nice and firm slap on that face plate you know there's a gasket there's a foam gasket on the back side of this you just want to make sure that whole thing is tightened down and compressed with the monitor set up like this I like that the handle off to the side makes it real easy for this little Allen screw and the Allen R just to get in right here you're able to that rolling it's going to be locked in place everything is tight and buttoned up now we just got to do is