Skip to main content
Stesso

Install Bonnet Nut and Adjust Anti-Scald Feature

3:26
6:54
170K views

At 3:26 in

Top Tip For Removing Delta Shower Cartridge - Easy Replacement Guide!

Watch on YouTube

What happens here

Screw the bonnet nut back onto the valve body by hand until it's snug. Use pliers to give it a slight final turn, about a quarter turn, to secure it. Do not over-tighten. Then, adjust the anti-scald feature by pulling the white plastic ring forward, rotating it counter-clockwise to the maximum hot setting, and letting it pop back into place. This allows the faucet to deliver the hottest possible water.

Goal: Shower Faucet Repair (Standard)

Tools and materials

  • Slip-Joint Pliers Knipex — Gently tightening the bonnet nut

What they say

Hide

popped on there screw the Bonnet nut on don't go czy crazy with this I just like to just barely just make sure it's snugged on there okay that's it this is the anti-cold feature grab the white part you want to pull it out turn it to the left as far as you can and then let it pop back in this will ensure that you get the hottest water that you want now if you have young kids

Auto-generated from the video audio.