Surface Preparation and Initial Sanding
0:01
1:01
5.2K views
At 0:01 in
Tools that make you money. Apollo Precision HVLP sprayer. Ekasand 3x4 sander, PaintLine booth.
What happens here
Begin by thoroughly sanding the entire exterior surface of the dresser. Use an orbital sander with medium-grit sandpaper (e.g., 180-220 grit) for the larger, flat areas. For edges, corners, and detailed sections, use a sanding sponge or hand sand with sandpaper. The goal is to remove any old finish, smooth out imperfections, and create a surface that paint can adhere to. Pay close attention to any previous hardware holes if they will not be reused.
Goal: Smooth and prepare the dresser surface for painting
Tools and materials
- Dust Mask — Protecting respiratory system from dust
- Medium-grit Sandpaper — Initial sanding to remove old finish and smooth imperfections
- Orbital Sander — Sanding large, flat surfaces of the dresser
- Safety Glasses — Protecting eyes from dust and debris
- Sanding Sponge — Sanding edges, corners, and areas difficult to reach with an orbital sander
- Tack Cloth — Wiping away fine dust after sanding