Apply Second Coat and Remove Masking

5:41

7:31

1.7M views

At 5:41 in

Tips Painting A Room In 1 Hour. DIY How To Paint Walls Fast.

Watch on YouTube

What happens here

After the first coat has dried (approximately 30 minutes, especially if aided by increased room temperature), apply the second coat of paint using the same rolling technique. Focus on achieving full, even coverage this time. Once the second coat is applied, immediately remove all tape and masking while the paint is still wet. This prevents the tape from pulling off dried paint, ensuring crisp, clean lines. The video shows the second coat being applied and the masking tape being carefully peeled away.

Goal: Achieve full paint coverage and remove masking cleanly

Tools and materials

9-inch Nap Roller — Applying the second coat of paint
Extension Pole — Extending the reach of the paint roller

What they say

(771 characters)

Hide

now I've got all of our cuttings done the first coat is dry about 30 minutes later and we're rolling our second coat and once the second coat is rolled we're going to pull off all of our masking and while doing our cutting c ends we actually used cocking the tape and then did our cut ends just about got this room completed got two coats it's tooken approximately about 1 hour to get this entire room completed cut ends two coats on the walls and all cleaned up just making our final touchup kit leave to the customer and here where we're rolling this wall our cut ends were moving quick enough that our cut ends aren't drying so we could pull off our tape and masking after the second coat is it's about a 14 by 13 Ved ceiling room completed in 1 hour this is Chris the

Auto-generated from the video audio.