Prepare and Attach Tool to Hose

0:04

1:13

26.4K views

At 0:04 in

This should be automatic on every piece of equipment. #equipment #yes #please

Watch on YouTube

What happens here

To prepare the hydraulic pressure release tool for use, first locate the outer threaded barrel. Turn this barrel to unscrew and retract the internal center pin as far back as it can go. This retraction is essential to allow the tool to properly engage with the quick coupler of the pressurized hydraulic hose. Once the center pin is fully retracted, the tool is ready to be connected to the quick coupler on the hydraulic hose that needs to be depressurized. Securely clip the tool onto the quick coupler.

Goal: Securely connect the pressure release tool to a pressurized hydraulic hose.

Tools and materials

Hydraulic Hose — The component from which hydraulic pressure needs to be released
Hydraulic Pressure Release Tool PolySkid — Attaching to the hydraulic hose to release pressure

What they say

(492 characters)

Hide

All right, Pat, what are we looking at with this thing now? >> This here is a hydraulic repressor release tool. And basically what you do is you end up screwing this back and it's going to take the center pin away way back. And then you're going to clip it on the hose that has pressure on and put that on like that. And then you screw this in. Put the hose in your EPA approved can and you screw this in. It'll release the pressure in the hose. So once the hose pressure released, just

Auto-generated from the video audio.