Remove Stock Components

ahead and tip the tank down and start building this. All right. So, now that we got that hose off, now we can start putting these pieces together. So, let's get this one open. Always in your left hand, clockwise. This shit's thick, dude. I don't I might get a new one. Let's use some of this [ __ ] I got to say the nicest thing about this whole sand blaster is that Harbor Freight actually provided some good Teflon tape. So, we're going to go ahead and teflon tape this up. I'm going to go ahead and I'm going to do the other side, too, cuz once it's on there, it's probably going to be a pain in the ass. So, hopefully I can get that to fit in there. It's getting tight already, which isn't a good sign. Probably cuz there shouldn't I'm going to get a pick and clean that all out. Those threads cleaned out. But let's see if it tightens up a little better. I just took a pick to them and took all the coal out of there cuz I I tried running coal through here already and it it just did not want to work at all. All right, so now let's throw our 1/2in ball valve on this end. All right, make sure you put the valve on the right way so when you turn it, it turns downward and not into the tank. I just made that mistake. I had to go back and fix it. So now we're going to go ahead and put on the close nipple, the half inch. We're going to go home. We're going to