Assembling the Dock Frame, Legs, and Wheels
At 6:42 in
This might GO BAD! Dock build/install farm catfish pond start to finish!
What happens here
The creator uses a Mahindra T57 HST tractor with a front loader attachment to move the long, boxed dock sections to the assembly area near the pond. The video shows the dock frame being assembled upside down. The square aluminum legs are inserted into designated slots on the underside of the frame. The Floe plastic wheels are then attached to the bottom of these legs, secured with metal washers and retaining clips. The creator emphasizes the importance of reading the instructions for specific torque settings to ensure the dock's stability and safety. He also notes the depth of the water (approximately 6 feet or 72 inches) is a factor in selecting the appropriate leg length for use in approximately 49 to 89 inches of water or 68 to 108 inches for extra deep wheels.
Goal: Assemble the main dock frame and attach the roll-in wheels and adjustable legs.
Tools and materials
- Cordless drill — Assembling components with a socket
- Floe dock legs Floe — Providing adjustable vertical support for the dock
- Floe dock sections Floe — Forming the main structural body of the dock
- Floe wheels Floe — Enabling the dock to be rolled into and out of the water
- Front loader/forks — Lifting and moving dock sections
- Mahindra T57 HST tractor Mahindra — Transporting and positioning heavy dock sections
- Retaining clips/pins — Securing the wheels to the legs
- Socket wrenches — Tightening bolts (9/16 inch, 3/4 inch sockets mentioned)
- Torque wrench — Ensuring precise tightening of bolts to specifications
- Washers — Securing the wheels to the legs