H-Track Portal and Geofencing for Optimized Operations

there's more but wait there's more because if the operator decides to fiddle with the controls on on his own or change up what you want done you from the office can reset those controls and put it back to where you want it plus with your HRA system it will actually tell you exactly where you were in the lot how much material you put down how far it through that material and the only reason that this is important is to eliminate lawsuits that's th% correct so from the portal you'll be able to see every that this machine is doing who did it where where it happened the time it happened how much material was put down how far you threw it to your point you can override the application metrics remotely on this machine so in your example if the operator goes off script if you saw that in real time you could turn those metrics back down to where they are but you can also report on that deviation so if I have a 5 lb per th000 ft application rate here and Tim turned it up to 10 I can I can report on what we call a spread rate conflict and that will tell me where that deviation came from okay now Craig Tim we you said that this does a few things that no other spreader does on the planet you said that you said off camera that this is the world's most advanced spreader why well looking at things contextually through the the the concept of a system for the first time ever contractor will know before they go how much material is required to treat those sites furthermore the machine then when we assign those sites to the controller it optimizes your routes so if if I'm brand new to your team and I arrive at the first site and I don't know where to do where to go next I can hit H track on my controller and it will show me the next closest work site to my location