Skip to main content
Stesso

Introduction to Airwaves Vacuum System and Initial Demo

0:03
1:16
4K views

At 0:03 in

The perfect inspection table for cabinet doors! #innovation #new #newtools #tools #toolsofthetrade

Watch on YouTube

What happens here

The video introduces a 24-inch by 24-inch Airwaves vacuum table, highlighting its 5 CFM pump connected via an 8mm hose system. It features a 1/4 inch MDF spoil board, which serves as a general-purpose sanding or cutting platform for holding small parts. The presenter activates the vacuum pump, demonstrating how air is pulled directly through the porous MDF spoil board. He explains that for smaller parts, this direct vacuum might not be sufficient to hold them securely.

Goal: Understand the basic setup and limitations of the vacuum table without a gasket.

Tools and materials

  • 1/4 inch MDF Spoil Board
  • 5 CFM Vacuum Pump
  • 8mm Hose System
  • Airwaves Vacuum Table (24x24 inch)
  • Small part (clear acrylic disk)

What they say

Hide

Here we have our airwaves vacuum system. This is a 24-in x 24 in vacuum table with a 5 CFM pump plumbed in from the side using an 8 mm uh hose system. We've got a/4in spoil board here. This would be kind of your sanding station or your platform that you would use to cut small parts or hold small parts. We're going to turn the vacuum pump on. We're pulling air directly through this MDF spoil board here. When you go to prep your surfaces, small parts aren't going to hold very well. So, what we have is our tile gasket, and we seal the surface

Auto-generated from the video audio.