Speedymason: King Klinker Thin Brick System

22:00

24:14

66.3K views

At 22:00 in

the HARDSCAPERS tool and EQUIPMENT show!

Watch on YouTube

What happens here

The final product showcase features the King Klinker thin brick system by Speedymason. The representative explains that the product consists of composite panels (16 inches tall, 48 or 96 inches long) with tongue-and-groove connections for easy installation. Fastening points are every 8 inches on center, providing over 300 pounds per square foot pull-out strength. After fastening the panels, a polymer-modified mortar is scratch-coated over them, and then thin bricks are pressed into the mortar, using the panel's legs to ensure consistent 3/8-inch bed joints.

Goal: Understand the installation and benefits of the King Klinker thin brick composite panel system.

Tools and materials

Circular Saw — Cutting the composite panels
King Klinker Thin Brick King Klinker — The aesthetic facade applied to the panels
Polymer-Modified Mortar — Adhering the thin bricks to the panels
Speedymason Composite Panels Speedymason — Serving as the base for thin brick installation
Utility Knife — Scoring and snapping panels

What they say

(2,024 characters)

Hide

this is a special size thin brick that fits right into our panel so what we'll do is we'll scratch coat over and then we'll just stick these brick in and it'll give you a nice little joint here and you don't necessarily have to fill that in with mortar so this this takes about half the time of something like this i hate these yeah that sucks that's the worst part of it so like we did we did some research on it to see you know how much faster we could go if we didn't have to do any of the begging and grouting don't tell me uh three or four times faster it's three or four times faster um yeah yeah it's uh about 14 square feet an hour uh for this and it's about 34 square feet an hour twice as fast two and a half yeah two and a half above yeah so when you can eliminate bagging uh one of my youtube videos is how to bang and strike uh thin brick and i have thousands of views on just that do you have do you have a youtube video on how to clean up the mess as you go to because that's the crappiest part because as soon as you do this yeah because you do it you do it you build from the top from the bottom up and then you inevitably spill and then you're scrubbing yep and then you're fixing your grout line right so with this uh with you know bagging and striking you've got to wait for that mortar to dry up enough for thumbprint ready right so when i strike this off it should be relatively dry so it shouldn't be smearing down your brick if it is you're striking it too soon okay where do you guys find this uh you will find this at king's material and we produce it in sparta wisconsin and the brick comes from poland and we import that again all right thank you sir meet you man nice meeting you you're my number one yeah i guess you are you've signed i've signed that cap for you twice kiddo thanks for coming today what's your name jake what's your dad's name chad where are you guys from bellevue iowa what do i say at the end of every video god bless and go get em thank you sir you guys ready one two three

Auto-generated from the video audio.