Skip to main content
Stesso

Prepare Tractor for Operation

2:45
8:57
42.4K views

At 2:45 in

THE DAY MY DRONE WENT INTO THE MANURE SPREADER!! MUST SEE!!

Watch on YouTube

What happens here

The Massey Ferguson 240 tractor is backed up and connected to the loaded manure spreader. Before driving to the spreading area, the operator gets into the tractor's cabin. Key steps include starting the tractor and then engaging the Power Take-Off (PTO) system. The PTO shaft connects the tractor's engine power to the spreader's internal mechanisms, activating the conveyor chain and the rear beaters. The operator ensures the PTO is set to the correct high or low range, typically high for spreading, to achieve the desired rotational speed for effective material distribution.

Goal: Connect the loaded spreader to the tractor and configure the tractor's Power Take-Off (PTO) to power the spreading mechanism.

Tools and materials

  • Manure Spreader
  • Massey Ferguson 240 Tractor

What they say

Hide

handles right there and see it at work all right if you've never been on a tractor there's a few things you need to know there are two gear shifters down here this one should be in neutral and this one should be in the S position so there is a low a high and a start right in the center so we're in start our brake is set our kill switch is pushed in our clutch is down and now we'll start the tractor over and over and over again I will tell

Auto-generated from the video audio.