Initial Spray Test
0:00
0:21
25.5K views
At 0:00 in
The control you have with an Apollo Atomizer -Gun- #tooltest
What happens here
Begin by holding the HVLP spray gun and connecting it to an air hose. Ensure the gun has testing liquid (such as paint or water) in its cup. Position the gun approximately 6-8 inches from a test surface, like the plastic sheeting shown. Pull the trigger to initiate a spray, observing the initial pattern and consistency. This first spray provides a baseline for subsequent adjustments.
Goal: Observe the initial spray pattern and confirm gun functionality
Tools and materials
- Air Hose — To supply compressed air to the spray gun
- Gloves — Protecting hands from paint and chemicals
- HVLP Spray Gun — To apply the testing liquid/paint in a controlled spray
- Plastic Sheeting — As a test surface for observing spray patterns
- Testing Liquid — To simulate paint for testing spray patterns