Quadra-Clean Filtration System

filter and that's why we use these P PL pleated Automotive filters on both sides of the case because the air going in the cooling the motor is equally as important to be clean as the air going out to your spray gun you don't want all the overspray being sucked in through the filter and and coating the the Armature of the motor things like that is going to take away from the life of the motor and cause it to not perform properly right so filtration is really important and I noticed like you you have fs and and I assume these are allowing air to go in and out of um you know the system itself and I noticed there's a lot more of those fins than on this unit than other units I've used from other manufacturers you know why is there more and what's the importance of that so it's not because we think cooling louers are cool right um but they actually are there functionally right so on the back side of the machine or the side of the machine here we have 14 louvers on this side we have 12 so a total of 26 cooling louvers so it's important as that hot air or that cool air comes in cools that motor that it's pushed outside the box as quickly as possible other systems out there either stagnate the air by shutting off the motor or they don't shut it off at all in which case the the the heat just keeps building inside the machine when it's not being used so with the Power Pause we not only pull down the the the um the RPM of the motor and run it to uh keep the motor cool but then by having all these cooling louvers on here we build up positive pressure in the box which now pushes out that hot air out of the box and by having 26 cooling louvers it gets that hot air out of the box as fast as possible and everything with these machines is keeping that heat down right the cooler we keep these motors