Skip to main content
Stesso

Cutting a Metal Rod

0:11
1:29
56.2K views

At 0:11 in

That's the way it's done. #tough #tools #diy #construction

Watch on YouTube

What happens here

To demonstrate the cutting capability, securely position a 3/4 inch metal rod on a stable surface. Mount the Millner-Haufen combination cutting and grinding wheel onto an angle grinder. With appropriate safety gear (safety glasses, gloves), activate the angle grinder and carefully cut through the metal rod. Observe the quick and efficient cutting action, producing sparks typical of metal cutting.

Goal: Cut through a 3/4 inch metal rod

Tools and materials

  • Angle Grinder — Powering the cutting and grinding wheel
  • Safety Glasses — Protecting eyes from sparks and debris
  • Work Gloves — Protecting hands from heat, sparks, and vibrations
  • 3/4 inch Metal Rod — Material to be cut to demonstrate the wheel's capability on metal

What they say

Hide

Garen, what are we looking at with this now? >> That's our combination cutting and grinding wheel, electroplated diamond, super tough. They don't chip on you, they don't snap on you. They will cut and grind whatever you put in front of it. Here's a 3/4 inch drive. Cut it with that same wheel. Here's 41, you guys were asking about 41. So, stuff like ceramic You can grind anything with this wheel. Sheet metal or

Auto-generated from the video audio.