Clamp Mold and Inject Sealant

0:13

1:15

571.1K views

At 0:13 in

That’s a tight seal. #truck #automobile #repairs #tools #shorts

Watch on YouTube

What happens here

Once the wires are seated in the mold, clamp the two halves of the mold securely together. Then, using a specialized gun, inject the solvent/sealant into the mold's opening. Continue injecting until you feel slight back pressure, indicating the mold is full. It's advisable to add a little excess sealant, as it will shrink slightly during the drying process, ensuring all gaps and bubbles are filled for a complete seal.

Goal: The mold is clamped shut around the connection, and a liquid solvent/sealant is injected to fill all gaps and encapsulate the joint.

Tools and materials

Sealant Gun
Spli-seal Mold
Sealant/Solvent Spli-seal

What they say

(541 characters)

Hide

butt connector. You're going to place it in your mold here. We're going to do a one one connection. This mold has a 1 to2 connection as well. You're going to clamp it up. Put your solvent in there. You're going to feel a little back pressure as it starts to fill up. Want to put a little excess cuz as it dries, it's going to shrink. You want it to fill in all the gaps and bubbles. So, that's a 30 seconds. So, as as that's curing, what are we looking at with these molds here? So, what we got going on here is that this is a different mold

Auto-generated from the video audio.