Skip to main content
Stesso

Apply Flux to Joints

5:55
9:22
769 views

At 5:55 in

THAT FIX IT GUY TO THE RESCUE...QUICK PLUMBING FIX!!

Watch on YouTube

What happens here

After cleaning, flux is applied to all surfaces that will be soldered. The plumber uses 'No-Corrode' brand flux and applies it generously to the outside of the existing pipe ends and the inside of the new copper coupling. Flux helps prevent re-oxidation during heating and aids solder flow.

Goal: Prepare copper surfaces for solder adhesion.

Tools and materials

  • Flux No-Corrode — Cleaning and aiding solder flow on copper surfaces

What they say

Hide

rock and roll there this is going to go back in place right here and then we're going to spin this around right here for the time being and just get it to where we can solder this up um there that i know i've seen some paper towel so you're just gonna wipe the extra flux off too you want to get all that off of there you can see all this green right here that's actually because they didn't wipe the flux off that's all just old flux

Auto-generated from the video audio.