Skip to main content
Stesso

Compare Results and Conclude

0:36
0:51
20.7K views

At 0:36 in

Testing OVERCUT rafter tail framing

Watch on YouTube

What happens here

With both rafter pieces having been subjected to the stress test, the presenter holds up both the broken 'OVER CUT' and 'NOT' rafter pieces for visual comparison. He states that both pieces failed at approximately 2000 pounds of applied pressure. Based on these results, he concludes that for applications such as rafters and stairs, performing an 'overcut' during framing might not significantly compromise the structural integrity or load-bearing capacity in extreme situations. He then invites viewers to share their own opinions and experiences on the topic.

Goal: Compare the strength of 'overcut' and 'not overcut' rafters and draw conclusions.

Tools and materials

  • Broken 'NOT' rafter piece N/A — Visual comparison and analysis
  • Broken 'OVER CUT' rafter piece N/A — Visual comparison and analysis

What they say

Hide

Testing some framing. We got overcut and not overcut. Both the overcut and no overcut failed at 2,000 lb. This would be an extreme situation for a rafter with these overcuts. I personally don't think it matters for rafters and stairs if you overcut, but let me know what you think.

Auto-generated from the video audio.