Skip to main content
Stesso

Test Fuses for Continuity

0:18
1:11
5.3K views

At 0:18 in

Testing for continuity diy #tools #home #electrical #handyman

Watch on YouTube

What happens here

To test a fuse, place one multimeter probe on each metal terminal of the fuse. If the fuse is good, the multimeter will beep, indicating continuity. If the fuse is blown, there will be no beep, and the display will likely show 'OL', signifying an open circuit.

Goal: Determine if a fuse is good or blown.

Tools and materials

  • Multimeter Klein Tools MM400 — To test the fuses
  • Multimeter Probes — To connect to the fuse terminals
  • Automotive Fuses — Demonstrating good and bad fuses

What they say

Hide

the middle of it. So, here you can hear that beep. Now, what I like to use continuity for is testing fuses. So, this fuse is good. You can see the link in there. And this fuse no beep, not good. So, you can do the same with your switch. Put your two on your switch here.

Auto-generated from the video audio.