Skip to main content
Stesso

Bend and Secure EMT Conduit

0:09
0:58
43.5K views

At 0:09 in

Tesla Wall Connector Installation, and how an Electrician does it #tesla #electrician

Watch on YouTube

What happens here

Take a 3/4 inch EMT (Electrical Metallic Tubing) conduit pipe and use a conduit bender to create the necessary bends, typically a 90-degree bend to run vertically up the wall from the junction box. Insert one end of the bent conduit into the previously mounted junction box. Then, use conduit straps/clamps and screws, driven by a cordless drill, to securely fasten the conduit to the wall, ensuring it runs straight and is firmly attached. Use a level again to ensure the conduit is plumb.

Goal: Create and install a protective pathway for the electrical wires

Tools and materials

  • 3/4 inch EMT Conduit Pipe — Creating a protective pathway for electrical wires
  • Conduit Bender — Bending the EMT conduit to the desired angles
  • Conduit Straps/Clamps — Holding the conduit firmly against the wall
  • Cordless Drill Milwaukee — Driving screws to mount the conduit straps
  • Level — Ensuring the conduit is plumb and straight
  • Screws — Securing the conduit straps to the wall

What they say

Hide

how an apprentice installs a Tesla home car charger step one got to level the box for the wires coming from basement panel step two Bend 3/4 inm conduit pipe for charger no homeowners should troubleshoot their own electric should always call an electrician especially with high amperage car chargers your safety is our

Auto-generated from the video audio.