Skip to main content

Commercial Vs. Residential Electric, the key differences #electrician #bluecollar #commercial

0:57
31.6K views

Video by Hendy The Sparky

Hendy The Sparky

What happens here

This video provides an informative overview of the key differences between commercial and residential electrical panels. An electrician explains distinctions in voltage, amperage capacity, wiring methods, and circuit breaker installation techniques, highlighting specific features found in commercial electrical systems compared to typical home setups.

Transcript

Hide

all right Ken what did you just do all right well I'm not done so obviously I'm going to get this all bundled up make it look nice in here um so basically we're adding two circuits these are 277 volt your single pole in a house you know it's like 120 volt you got one hot okay so in this case we got 277 volt here this a 480 volt panel yes 480 no well yeah but it's fed from 600 amps as you can see look at all these Hots here so it's ran in parallel some thick wires we turn off the whole main on the other side that's feeding this panel so I'm good and these Breakers right here are bolt-on Breakers as you there's a screw that goes in here that locks these in normally in a residential home you can just snap them in like yeah I see good but in this case I have to get the screw make it look good I see neutrals grounds and Hots yeah but we're getting got it thanks for the knowledge

Auto-generated from the video audio.