Clean Doors & Exterior Fixtures

where it's painting the front door so we want to open it is locked so we actually have access to the house we'll go around unlock this we want to clean the front door packages we don't want to obviously get their packages wet so we're going to move those out and we'll actually set them inside we'll move these plants out of the way because we don't want to be knocking over plants over here we do have brick again we're going to want to be pressure washing the brick when it comes to screens you can see this now this screen right here um i can tell this screen is pretty oxidized right here and it's pretty old if you get if you get about this close with a pressure washer to that your you'll actually scar that screen so i'd be really careful we want to rinse it but i'd be probably about you know the nozzle about this far away from that we do want to clean the windows once again here we got vents we want to clean the vents we definitely want to make sure we get the fascia the drip metal there are this is one thing you don't want to miss we've got some hornet's nests up here and there's nothing worse than uh pressure washing the house and then the customer coming home and wondering whether we pressure washed it or not and them seeing hornets up there and then they assume we didn't pressure wash it because if we did we would knock down the hornets and um hornet's nest so we definitely want to make sure you know when we're pressure washing we're looking for hornet's nests and and knocking those things down um he's missing a downspout here which is um pretty interesting we've definitely got some water damage down here um here we got once again screens you know that we got to just be careful with nothing unusual on this side other than vents uh hornet's nest the lights a lot of times those light bulbs um those flood lights those things um they they can be um exposed to weather and stuff and really weak and if you shoot straight at them with like a straight nozzle you can end up um damaging and breaking a light so be really careful uh like we got lights out front um a lot of these lights sometimes they'll be on plastic right here and i've shot um a straight nozzle at stuff like this and broken it so you got to be careful you know we want to rinse the lights off but we don't want to like right here you can see that one right there the sensor is broken right there um so you got to be careful with that kind of stuff i can see these sensors are all oxidized right here and…