Perform Metal Sandblasting

What happens here

With all safety gear on and equipment ready, begin sandblasting the metal part (in this case, a 1977 Jeep J20 fender). Hold the sandblasting nozzle a consistent distance from the surface, typically 6-12 inches, and maintain a steady angle, usually between 45 and 90 degrees to the surface, depending on the desired aggression and media. Move the nozzle in smooth, overlapping passes to ensure even coverage and removal of old paint, rust, and other contaminants. Work methodically across the entire surface, observing the metal as it transforms from rusty or painted to clean, bare metal. Adjust nozzle distance and angle as needed for stubborn areas, but avoid staying in one spot too long to prevent warping thin metal.

Goal: Thoroughly clean the metal surface down to bare metal by removing all rust, paint, and contaminants.