Apply Paint with Overlapping Passes

stacco I'm not worried about overspray getting on the stucco because I've got the the trim that blocks it and it keeps the the overspray from kicking you know outward right there I'm going to be spraying I'm coming down the line I'm overlapping 50% I always start off my first PA and I um started off twice because as you're moving along the line you're overlapping 50% and that first pass wouldn't get um two coats on it and so it'd probably be light on where it is um the color that the stucco got on there so two passes to start two passes to f um finish uh 50% overlap in the middle and it's going to be coated make sure um this is one and done we spray um one coat on here overlap 50% and the garage door is done so here we go we're going to spray it give you a look at what it looks like [Music] [Applause] [Music] so I guess the first thing I thought was I lost power but I um I turned the pressure up a little bit and it cycled so I knew I had power and I knew I had pressure at the pump cuz I got a gauge right there and it it was at you know like 1,800 PSI so I knew I had pressure I knew I had power but I didn't have paint coming out here so a little bit of troubleshooting we're going to think um see if we're back in business [Music] [Applause] [Music]