Skip to main content
Stesso

Assemble the Airless Spray System and Set Pressure

0:39
1:03
15.4K views

At 0:39 in

Spraying a decorative wall. What tools to use! #diy #howto #ideas #interiordesign #colorcustomizer

Watch on YouTube

What happens here

The complete spray system assembly is then detailed. This includes an RX 80 Titan gun, a 5-foot Paint Life whip hose for maneuverability, which is connected to a longer 25-foot main hose. The entire system is powered by a Titan Impact X440 airless sprayer. The presenter specifies that these are low-pressure fine finish tips from X Flex and that he is running the sprayer at approximately 1500 PSI (pounds per square inch) to achieve the desired finish.

Goal: Connect all components of the airless sprayer and set the operating pressure.

Tools and materials

  • 25-foot Main Hose — Connecting the airless sprayer to the whip hose
  • 5-foot Paint Life Whip Hose Paint Life — Connecting the main hose to the spray gun, providing flexibility
  • Gloves Mechanix Wear — Protecting hands from paint
  • Respirator — Protecting against inhalation of paint fumes and particles
  • RX 80 Titan Gun Titan — The main component held by the user to direct paint
  • Titan Impact X440 Airless Sprayer Titan — Pumping paint at high pressure

What they say

Hide

So that's the fan pivot attached to my RX 80 Titan gun right here. Got a 5 foot, 5 foot paint life whip hose whip right here hooked to my 25 foot hose and a Titan impact X440 and these are low pressure fine finish tips from exit flex right here. I'm running around 1500 PSI.

Auto-generated from the video audio.