Spraying a decorative wall. What tools to use! #diy #howto #ideas #interiordesign #colorcustomizer

1:03

15.4K views

Video by The Idaho Painter

The Idaho Painter

Watch on YouTube

What happens here

This project provides an overview of an airless spray painting setup specifically chosen for achieving a fine finish on a decorative wall, such as wainscoting or board and batten. It details the use of specialized tips, guards, a fan pivot for versatile spraying angles, and the appropriate airless sprayer and hose configuration, including recommended operating pressure. The video briefly demonstrates the efficient application of paint on these complex wall surfaces.

Transcript

(780 characters)

Hide

I'm going to show you my setup today to spray this decorative wall right here. I'm using an exit flex 410 low pressure fine finish tip using an exit flex twin fit guard. Exit flex twin fit guards will fit all your tips, including Draco rack X tips and every other tip out there. I'm using a green fan pivot right here. So when I spray the top, I can rotate my gun on my tip. It's like that quick, quick so I can shoot the top right here. I like shooting the face. I'll just turn it back to shoot the face. So that's the fan pivot attached to my RX 80 Titan gun right here. Got a 5 foot, 5 foot paint life whip hose whip right here hooked to my 25 foot hose and a Titan impact X440 and these are low pressure fine finish tips from exit flex right here. I'm running around 1500 PSI.

Auto-generated from the video audio.