Skip to main content
Stesso

Apply Caulk to Trim Gaps

2:57
8:34
24.9K views

At 2:57 in

Sponge Caulking the perfect bead! Interior trim painting tips.

Watch on YouTube

What happens here

Before applying caulk, ensure the tip of the caulk tube is cut at a 45-degree angle. The presenter recommends a small hole to ensure a thin, precise bead of caulk. He then proceeds to apply a continuous bead of caulk along the top and sides of the door jamb where the trim meets the wall. For larger cracks, apply the caulk slowly to ensure it fully penetrates and fills the gap. Between each application, wipe any excess caulk from the tip of the caulk gun onto the damp sponge to prevent drips and messes on the surface. This continuous wiping helps maintain a clean work area and a smooth caulk line.

Goal: Apply a uniform bead of caulk to all gaps and seams around the door jamb.

Tools and materials

  • Caulk Gun
  • Caulking Sponge
  • Acrylic Latex Caulk

What they say

Hide

make a mess on your surface so I'm typically wiping my um gun corner off before I start my bead I'm going to start up here just going to do some Corners you can typically this um stuff doesn't dry super fast so you can caul this whole door jam with your caulking before you lay it out and you're not going have to worry about it drying or coagulating I'm just going to put a small bead on there I typically just cut a 45° angle on my gun and I don't want the hole to be too big cuz I don't want my bead of cocking to be too large either keep a nice smooth consistent speed and every time I'm always wiping it off before I start cing again I wi it's kind of just I do it subconsciously and be working this corner right here so I want to have all edges of it right there done I can do this whole Jam this side of the jam and not worry about it drying if I'm outside and it's warm I probably wouldn't do this part of it if you got large cracks make sure you slow down so your caulking fills that crack so now I'm going to start wiping it off I'm going to wet my finger lay out my bead wipe off the excess so wiping off the excess reets your finger so why I call it sponge caulking cuz I'm using a caulking sponge to lay out with now when it come to these Corners I want my Corners to be perfect I'm very particular about how much caulking I leave behind so I'm

Auto-generated from the video audio.