Skip to main content
Stesso

Tension Wire with Tool

0:33
1:28
607.4K views

At 0:33 in

So thats how its done. #tools #diy #construction #mechanic #repair #shorts

Watch on YouTube

What happens here

Take the ClampTite tool and slide its 'nose' (the pointed end) into the wire loop created in Step 2. Guide the two free ends of the wire over the pins located on the tool's head. Begin to twist the tool; this action will pull the wire tight around the object. The demonstrator advises that you will 'feel the tension in the tool' as it becomes sufficiently tight, ensuring the clamp is flush and secure against the hose or object.

Goal: Use the ClampTite tool to apply tension to the wire, drawing the clamp tight and flush against the object.

Tools and materials

  • ClampTite Tool
  • Hose/Object with Wire

What they say

Hide

Make sure you're not crossed or not overlapped. That would be your weak spot. Take the tool, slide your nose in. You got a pin and a pin. Over those two and around. Quick twist, locks you down. Notch on the end, pop it in there, and you're in business. Tighten it up. No twisting, you're push pulling. When you're tight, you'll feel it. Go with the flow, you'll feel the tension in the tool. You're going to get nice and flush on your hose, okay?

Auto-generated from the video audio.