Skip to main content
Stesso

Mix Custom Color and Thickener

0:41
1:01
7.7K views

At 0:41 in

Simple solution to colored caulking! #innovation #solutions

Watch on YouTube

What happens here

To customize the sealant color, first introduce your chosen water-based paint into the Sashco Exact Color Sealant tube. Mix the paint with the sealant for approximately one minute. After this initial mix, add the provided thickener to the tube. Continue mixing for an additional minute to thoroughly combine the thickener and achieve the desired consistency.

Goal: Achieve the desired color and consistency of the sealant.

Tools and materials

  • Caulk Gun — To hold and facilitate the mixing within the sealant tube, and later for application
  • Sealant Thickener Sashco — To achieve the proper body and consistency of the sealant after tinting
  • Water-based Paint Any paint manufacturer — To provide the desired custom color to the sealant

What they say

Hide

So, now again, but it takes about three minutes to mix it up, right? You put the paint in, mix for a minute, put the thickener in, mix for another minute, and then you didn't let it set for about 30 minutes,

Auto-generated from the video audio.