Spray and Backbrush Stain

12:17

20:35

57.3K views

At 12:17 in

Should You Back Brush Stain? Spraying vs Back Brushing Stain.

Watch on YouTube

What happens here

Apply the stain to the logs of the cabin using a spray and backbrush technique. The presenter first sprays a section of logs to saturate them with stain, then immediately follows with backbrushing to ensure even penetration and adhesion. This process is repeated across the entire cabin. He moves methodically, explaining that he applies a lot of product and continuously backbrushes it until the logs are completely saturated. The presenter emphasizes that working this way allows any remaining moisture in the logs to help the stain penetrate more evenly, resulting in a better finish. He uses both a standard stain brush and a 5-inch block stainer for this task.

Goal: Apply stain to the cabin logs with optimal penetration and even finish.

Tools and materials

Block Stainer — Backbrushing the sprayed stain, especially on large log surfaces
Ladders — Reaching higher sections of the cabin
Paint Sprayer — Spraying stain onto the logs
Stain Brush — Backbrushing the sprayed stain

What they say

(1,866 characters)

Hide

also all right so we're moving right along doing the staining and i did uh pressure wash the thing today and i typically when i do fences um and uh log home stuff like this i like to actually pressure wash it let it dry for half a day and then i like to come back and start the staining process same day because to me there if there's a little bit of moisture left in those logs in any of the dry wood it's actually going to help the stain penetrate more evenly and you're going to get an even uh more even finish i guess is that how um i want to say it so i just think when it comes to especially like fences too they're so dry if there's a little bit of moisture left in the fence while you're spraying it gives you more working time and the finish actually comes out a lot more even so i'm just working my way down this side and we're going to work this way down the side so we're just continuing right along here just spraying and back brushing and as i'm spraying i'm just spraying back brushing and if it looks a little bit dry then i keep adding just more product spraying and back brush until it looks completely saturated and then i'm moving right along so i'm continuing along on the back side of the cabin now spraying it and once again part of the keys to this whole staining process is really saturating putting on a lot of product that you have to back brush i'm doing the front of the cabin now these snowboards and stuff they're going to be removed and we're going to be staining the top of this cabin also so i'm not concerned about overspray i'm controlling over spray with a low pressure and on my tip so we're just masking these windows on this side also so we can continue spraying and back brushing this side of the cabin also [Music] so the back brushing process you know you just you can see right now these logs are completely saturated with

Auto-generated from the video audio.