Install Water Valve Manifold & Wiring
11:29
30:35
257.3K views
At 11:29 in
Save $$$ With This Diy Sprinkler System And Grass Combo!
What happens here
Install the water valve manifold and connect it to the main water supply and the individual zone lines. Dig a hole next to the house for the valve manifold box. Assemble the PVC fittings, including valves, onto the manifold using PVC primer and cement. The main water line will feed into this manifold, and individual valves will control water flow to each sprinkler zone. Place the assembled manifold into the ground box, ensuring all connections are tight. Connect the wires from each valve to the multi-strand sprinkler wire, which will run to the indoor sprinkler controller.
Goal: Set up the water valve manifold and connect its wiring to the sprinkler controller.
Tools and materials
- Drill Ryobi — Mounting the sprinkler controller
- Narrow Shovel — Digging the hole for the valve manifold box
- PVC Cement — Bonding PVC fittings together
- PVC Primer — Preparing PVC surfaces for cementing
- Screwdriver — Securing wiring connections
- Wire Strippers — Stripping insulation from wires
- 18-gauge — Connecting valves to the sprinkler controller
- Manifold Box — Housing and protecting the valve manifold
- PVC Pipe & Fittings — Connecting valves and lines
- Sprinkler Controller Orbit — Programming and automating sprinkler operation
- Water Valve Manifold — Controlling water flow to different zones